Cone Mills -MKO 2000
Another unique IKA Innovation, the cone mill MKO 2000 was designed to extend beyond the capabilities of the colloid mill. Due to it’s innovative design, it is capable of wet milling and grinding, producing even smaller particle sizes than a colloid mill. The milling gap is infinitely adjustable so that exact amount of milling action can be obtained.
The surfaces of the milling tool are coated with an extremely hard coating that has a very rough surface texture. The coatings consist of high quality materials such as carbides and ceramics, and have different grain sizes. The milling tool produces an extremely intense shear zone that can process materials with high or low viscosities, but even finer distribution and particle sizes than a colloid mill.
Applications
Colloid Mills
Nominal Flow Rate*
Output
Nominal Tip Speed
Power
Inlet/Outlet Connections
Type
gpm
l/h
rpm
fpm
m/s
hp
kW
inches
mm
MK 2000/4
0.04
300
7,900
4500
23
2
1.5
1 / 0.75
25 / 15
MK 2000/5
0.5
2,500
5,800
4500
23
7.5
5.5
2 / 1.5
40 / 32
MK 2000/10
2
7,500
4,200
4500
23
15
11
2 / 2
50 / 50
MK 2000/20
7
20,000
2,850
4500
23
40
27
3 / 2.5
80 / 65
MK 2000/30
15
40,000
1,420
4500
23
75
50
6 / 4
150 / 125
MK 2000/50
25
80,000
1,100
4500
23
150
110
8 / 6
200 / 150
*Flow rates are dependent of the gap setting and the material being processed. Flow rates can be reduced to as low as 10% of the maxium
