Multiple Stage Inline Dispersers
The DISPAX REACTOR is a high shear, three stage dispersing machine for the production of micro-emulsions and very fine suspensions. Three rotor-stator combinations (generators) in a series produce a small droplet or particle size, with a very narrow distribution. The generators can be easily interchanged, offering the ultimate in flexibility. The DR line offers the same advantages as the UTL for scalability and sanitary design, and is CIP and SIP capable.
Applications
Coarse, Medium, Fine, SuperfineSUPER DISPAX-REACTOR InlineIt is well known that tip speed, and therefore shear rate, is one of the most important factors in achieving the finest micro-emulsions. The SUPER DISPAX REACTOR combines extremely high shear rates with a fine generator geometry to produce the ultimate in high energy dispersing. Due to the high tip speeds, two stages are often all that is needed to achieve the results that are desired. The DRS is designed with the same high quality features as the UTL and the DR, and is especially suited for even the toughest pharmaceutical applications. Tip speeds exceeding 10,000 fpm can be achieved. The DRS can be an alternative to costly high pressure homogenizers.
DISPAX-REACTOR®
Nominal Flow Rate*
Output
Nominal Tip Speed
Power
Inlet/Outlet Connections
Type
gpm
l/h
rpm
fpm
m/s
hp
kW
inches
mm
DRS 2000/5
3
700
10,500
7900
40
10
7.5
2 / 1.5
40 / 32
DRS 2000/10
10
2,500
7,300
7900
40
20
15
2 / 2
50 / 50
DRS 2000/20
30
7,000
4,900
7900
40
50
37
3 / 2.5
80 / 65
DRS 2000/30
90
20,000
2,850
7900
40
100
75
6 / 4
150 / 125
DRS 2000/50
175
40,000
2,000
7900
40
200
160
8 / 6
200 / 150
* Flow rates can be +25% depending on fluid properties and auxillary pumping. Consult IKA for recommen
Applications
Neutralization & PH Adjustment Tooth paste Salt Solutions Catalysts Shampoos & Conditioners Polymerizations Pesticides, Herbicides Reaction Enhancements Microencapsulation Viscosity Control Creams, Lotions Fuels Generators available:
Coarse, Medium, Fine,
Superfine, 2P.
DISPAX-REACTOR®
Nominal Flow Rate*
Output
Nominal Tip Speed
Power
Inlet/Outlet Connections
Type
gpm
l/h
rpm
fpm
m/s
hp
kW
inches
mm
DR 2000/4
1.5
300
7,900
4500
23
2
1.5
1 / 0.75
25 / 15
DR 2000/5
10
2,500
5,800
4500
23
7.5
5.5
2 / 1.5
40 / 32
DR 2000/10
35
8,000
4,200
4500
23
20
15
2 / 2
50 / 50
DR 2000/20
90
20,000
3,000
4500
23
40
31
3 / 2.5
80 / 65
DR 2000/30
175
40,000
1,500
4500
23
75
55
6 / 4
150 / 125
DR 2000/40
300
70,000
1,500
4500
23
125
95
6 / 4
150 / 125
DR 2000/50
550
125,000
1,100
4500
23
200
160
8 / 6
200 / 150
* Flow rates can be +25% depending on fluid properties and auxiliary pumping. Consult IKA for recommendations
